Just a test

1 files changed, 469 insertions, 0 deletions

diff --git a/TWiki/WikiNotation/XF86Config b/TWiki/WikiNotation/XF86Config
new file mode 100644
index 00000000..08a241df
--- /dev/null
+++ b/TWiki/WikiNotation/XF86Config
@@ -0,0 +1,469 @@
+# File generated by xf86config.
+
+#
+# Copyright (c) 1999 by The XFree86 Project, Inc.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+# 
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
+# 
+# Except as contained in this notice, the name of the XFree86 Project shall
+# not be used in advertising or otherwise to promote the sale, use or other
+# dealings in this Software without prior written authorization from the
+# XFree86 Project.
+#
+
+# **********************************************************************
+# Refer to the XF86Config(4/5) man page for details about the format of 
+# this file.
+# **********************************************************************
+
+# **********************************************************************
+# Module section -- this  section  is used to specify
+# which dynamically loadable modules to load.
+# **********************************************************************
+#
+Section "Module"
+
+# This loads the DBE extension module.
+
+    Load        "dbe"  	# Double buffer extension
+
+# This loads the miscellaneous extensions module, and disables
+# initialisation of the XFree86-DGA extension within that module.
+    SubSection  "extmod"
+      Option    "omit xfree86-dga"   # don't initialise the DGA extension
+    EndSubSection
+
+# This loads the Type1 and FreeType font modules
+    Load        "type1"
+    Load        "speedo"
+#    Load        "freetype"
+#    Load        "xtt"
+
+# This loads the GLX module
+    Load       "glx"
+# This loads the DRI module
+#    Load       "dri"
+
+EndSection
+
+# **********************************************************************
+# Files section.  This allows default font and rgb paths to be set
+# **********************************************************************
+
+Section "Files"
+
+# The location of the RGB database.  Note, this is the name of the
+# file minus the extension (like ".txt" or ".db").  There is normally
+# no need to change the default.
+
+    RgbPath	"/usr/X11R6/lib/X11/rgb"
+
+# Multiple FontPath entries are allowed (which are concatenated together),
+# as well as specifying multiple comma-separated entries in one FontPath
+# command (or a combination of both methods)
+# 
+# If you don't have a floating point coprocessor and emacs, Mosaic or other
+# programs take long to start up, try moving the Type1 and Speedo directory
+# to the end of this list (or comment them out).
+#
+
+#    FontPath   "/usr/X11R6/lib/X11/fonts/TTF/"
+    FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic/"
+    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
+    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
+    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
+    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
+    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
+    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
+#    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType/"
+#    FontPath   "/usr/X11R6/lib/X11/fonts/freefont/"
+    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
+    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
+
+# The module search path.  The default path is shown here.
+
+#    ModulePath "/usr/X11R6/lib/modules"
+
+EndSection
+
+# **********************************************************************
+# Server flags section.
+# **********************************************************************
+
+Section "ServerFlags"
+
+# Uncomment this to cause a core dump at the spot where a signal is 
+# received.  This may leave the console in an unusable state, but may
+# provide a better stack trace in the core dump to aid in debugging
+
+#    Option "NoTrapSignals"
+
+# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
+# (where n is 1 through 12).  This allows clients to receive these key
+# events.
+
+#    Option "DontVTSwitch"
+
+# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
+# This allows clients to receive this key event.
+
+#    Option "DontZap"
+
+# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
+# sequences.  This allows clients to receive these key events.
+
+#    Option "Dont Zoom"
+
+# Uncomment this to disable tuning with the xvidtune client. With
+# it the client can still run and fetch card and monitor attributes,
+# but it will not be allowed to change them. If it tries it will
+# receive a protocol error.
+
+#    Option "DisableVidModeExtension"
+
+# Uncomment this to enable the use of a non-local xvidtune client. 
+
+#    Option "AllowNonLocalXvidtune"
+
+# Uncomment this to disable dynamically modifying the input device
+# (mouse and keyboard) settings. 
+
+#    Option "DisableModInDev"
+
+# Uncomment this to enable the use of a non-local client to
+# change the keyboard or mouse settings (currently only xset).
+
+#    Option "AllowNonLocalModInDev"
+
+EndSection
+
+# **********************************************************************
+# Input devices
+# **********************************************************************
+
+# **********************************************************************
+# Core keyboard's InputDevice section
+# **********************************************************************
+
+Section "InputDevice"
+
+    Identifier	"Keyboard1"
+    Driver	"Keyboard"
+    Option "AutoRepeat" "500 30"
+    Option "XkbRules" "xfree86"
+    Option "XkbModel" "pc105"
+    Option "XkbLayout" "us,ru(winkeys)"
+    Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
+    
+# For most OSs the protocol can be omitted (it defaults to "Standard").
+# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
+# uncomment the following line.
+
+#    Option     "Protocol"      "Xqueue"
+
+#    Option "AutoRepeat" "500 30"
+
+# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
+#    Option	"Xleds"      "1 2 3"
+
+#    Option "LeftAlt"     "Meta"
+#    Option "RightAlt"    "ModeShift"
+
+# To customise the XKB settings to suit your keyboard, modify the
+# lines below (which are the defaults).  For example, for a non-U.S.
+# keyboard, you will probably want to use:
+#    Option "XkbModel"    "pc102"
+# If you have a US Microsoft Natural keyboard, you can use:
+#    Option "XkbModel"    "microsoft"
+#
+# Then to change the language, change the Layout setting.
+# For example, a german layout can be obtained with:
+#    Option "XkbLayout"   "de"
+# or:
+#    Option "XkbLayout"   "de"
+#    Option "XkbVariant"  "nodeadkeys"
+#
+# If you'd like to switch the positions of your capslock and
+# control keys, use:
+#    Option "XkbOptions"  "ctrl:swapcaps"
+
+# These are the default XKB settings for XFree86
+#    Option "XkbRules"    "xfree86"
+#    Option "XkbModel"    "pc101"
+#    Option "XkbLayout"   "us"
+#    Option "XkbVariant"  ""
+#    Option "XkbOptions"  ""
+
+#    Option "XkbDisable"
+
+#    Option "XkbRules"	"xfree86"
+#    Option "XkbModel"	"pc101"
+#    Option "XkbLayout"	"us"
+
+EndSection
+
+
+# **********************************************************************
+# Core Pointer's InputDevice section
+# **********************************************************************
+
+Section "InputDevice"
+
+# Identifier and driver
+
+    Identifier	"Mouse1"
+    Driver	"mouse"
+    Option "ZAxisMapping" "4 5"
+    Option "Protocol"    "IMPS/2"
+    Option "Device"      "/dev/psaux"
+
+# Mouse-speed setting for PS/2 mouse.
+
+#    Option "Resolution"	"256"
+
+# When using XQUEUE, comment out the above two lines, and uncomment
+# the following line.
+
+#    Option "Protocol"	"Xqueue"
+
+# Baudrate and SampleRate are only for some Logitech mice. In
+# almost every case these lines should be omitted.
+
+#    Option "BaudRate"	"9600"
+#    Option "SampleRate"	"150"
+
+# Emulate3Buttons is an option for 2-button Microsoft mice
+# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
+
+#    Option "Emulate3Buttons"
+#    Option "Emulate3Timeout"    "50"
+
+# ChordMiddle is an option for some 3-button Logitech mice
+
+#    Option "ChordMiddle"
+
+EndSection
+
+
+# **********************************************************************
+# Other input device sections 
+# this is optional and is required only if you
+# are using extended input devices.  This is for example only.  Refer
+# to the XF86Config man page for a description of the options.
+# **********************************************************************
+#
+# Section "InputDevice" 
+#    Identifier  "Mouse2"
+#    Driver      "mouse"
+#    Option      "Protocol"      "MouseMan"
+#    Option      "Device"        "/dev/mouse2"
+# EndSection
+#
+# Section "InputDevice"
+#    Identifier "spaceball"
+#    Driver     "magellan"
+#    Option     "Device"        "/dev/cua0"
+# EndSection
+#
+# Section "InputDevice"
+#    Identifier "spaceball2"
+#    Driver     "spaceorb"
+#    Option     "Device"        "/dev/cua0"
+# EndSection
+#
+# Section "InputDevice"
+#    Identifier "touchscreen0"
+#    Driver     "microtouch"
+#    Option     "Device"        "/dev/ttyS0"
+#    Option     "MinX"          "1412"
+#    Option     "MaxX"          "15184"
+#    Option     "MinY"          "15372"
+#    Option     "MaxY"          "1230"
+#    Option     "ScreenNumber"  "0"
+#    Option     "ReportingMode" "Scaled"
+#    Option     "ButtonNumber"  "1"
+#    Option     "SendCoreEvents"
+# EndSection
+#
+# Section "InputDevice"
+#    Identifier "touchscreen1"
+#    Driver     "elo2300"
+#    Option     "Device"        "/dev/ttyS0"
+#    Option     "MinX"          "231"
+#    Option     "MaxX"          "3868"
+#    Option     "MinY"          "3858"
+#    Option     "MaxY"          "272"
+#    Option     "ScreenNumber"  "0"
+#    Option     "ReportingMode" "Scaled"
+#    Option     "ButtonThreshold"       "17"
+#    Option     "ButtonNumber"  "1"
+#    Option     "SendCoreEvents"
+# EndSection
+
+# **********************************************************************
+# Monitor section
+# **********************************************************************
+
+# Any number of monitor sections may be present
+
+Section "Monitor"
+
+    Identifier  "My Monitor"
+
+# HorizSync is in kHz unless units are specified.
+# HorizSync may be a comma separated list of discrete values, or a
+# comma separated list of ranges of values.
+# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
+# USER MANUAL FOR THE CORRECT NUMBERS.
+
+#    HorizSync   31.5, 35.15, 35.5
+
+    HorizSync	30-64         # multisync
+#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
+#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
+
+# VertRefresh is in Hz unless units are specified.
+# VertRefresh may be a comma separated list of discrete values, or a
+# comma separated list of ranges of values.
+# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
+# USER MANUAL FOR THE CORRECT NUMBERS.
+
+    VertRefresh 50-70
+
+EndSection
+
+
+# **********************************************************************
+# Graphics device section
+# **********************************************************************
+
+# Any number of graphics device sections may be present
+
+# Standard VGA Device:
+
+Section "Device"
+    Identifier	"Standard VGA"
+    VendorName	"Unknown"
+    BoardName	"Unknown"
+
+# The chipset line is optional in most cases.  It can be used to override
+# the driver's chipset detection, and should not normally be specified.
+
+#    Chipset	"generic"
+
+# The Driver line must be present.  When using run-time loadable driver
+# modules, this line instructs the server to load the specified driver
+# module.  Even when not using loadable driver modules, this line
+# indicates which driver should interpret the information in this section.
+
+    Driver     "vga"
+# The BusID line is used to specify which of possibly multiple devices
+# this section is intended for.  When this line isn't present, a device
+# section can only match up with the primary video device.  For PCI
+# devices a line like the following could be used.  This line should not
+# normally be included unless there is more than one video device
+# intalled.
+
+#    BusID      "PCI:0:10:0"
+
+#    VideoRam	256
+
+#    Clocks	25.2 28.3
+
+EndSection
+
+# Device configured by xf86config:
+
+Section "Device"
+    Identifier  "RIVA TNT"
+    Driver      "nvidia"
+    #VideoRam    131072
+    # Insert Clocks lines here if appropriate
+EndSection
+
+
+# **********************************************************************
+# Screen sections
+# **********************************************************************
+
+# Any number of screen sections may be present.  Each describes
+# the configuration of a single screen.  A single specific screen section
+# may be specified from the X server command line with the "-screen"
+# option.
+Section "Screen"
+    Identifier  "Screen 1"
+    Device      "RIVA TNT"
+    Monitor     "My Monitor"
+    DefaultDepth 24
+
+    Subsection "Display"
+        Depth       8
+        Modes       "1280x1024" "1024x768" "800x600" "640x480"
+        ViewPort    0 0
+    EndSubsection
+    Subsection "Display"
+        Depth       16
+        Modes       "1280x1024" "1024x768" "800x600" "640x480"
+        ViewPort    0 0
+    EndSubsection
+    Subsection "Display"
+        Depth       24
+        Modes       "1024x768"
+        ViewPort    0 0
+    EndSubsection
+EndSection
+
+# **********************************************************************
+# ServerLayout sections.
+# **********************************************************************
+
+# Any number of ServerLayout sections may be present.  Each describes
+# the way multiple screens are organised.  A specific ServerLayout
+# section may be specified from the X server command line with the
+# "-layout" option.  In the absence of this, the first section is used.
+# When now ServerLayout section is present, the first Screen section
+# is used alone.
+
+Section "ServerLayout"
+
+# The Identifier line must be present
+    Identifier  "Simple Layout"
+
+# Each Screen line specifies a Screen section name, and optionally
+# the relative position of other screens.  The four names after
+# primary screen name are the screens to the top, bottom, left and right
+# of the primary screen.  In this example, screen 2 is located to the
+# right of screen 1.
+
+    Screen "Screen 1"
+
+# Each InputDevice line specifies an InputDevice section name and
+# optionally some options to specify the way the device is to be
+# used.  Those options include "CorePointer", "CoreKeyboard" and
+# "SendCoreEvents".
+
+    InputDevice "Mouse1" "CorePointer"
+    InputDevice "Keyboard1" "CoreKeyboard"
+
+EndSection
+
+# Section "DRI"
+#    Mode 0666
+# EndSection
+