doc/

2001-01-08  Marcus Brinkmann  <marcus@gnu.org>

	* hurd.texi (Store Management): Replace off_t with store_offset_t.
	(Store I/O): Likewise.
	(Store Classes): Likewise.

ext2fs/
2001-01-08  Marcus Brinkmann  <marcus@gnu.org>

	* ext2fs.c (main): Use %Ld instead %ld to print store->size.
	* hyper.c (get_hypermetadata): Likewise.

libstore/
2001-01-08  Marcus Brinkmann  <marcus@gnu.org>

	* zero.c (zero_remap): Change type of variables length, old_length
	to store_offset_t.
	(zero_decode): Change type of variable size to store_offset_t.
	(zero_open): Likewise. Use strtoull instead strtoul to parse
	size argument from name. Use store_offset_t for max_offs and
	its calculation.
	(store_zero_create): Use store_offset_t type for size argument.

	* derive.c (_store_derive): Use store_offset_t as type for
	variable last_part_base.

	* stripe.c (addr_adj): Change types of addr argument and return
	value to store_offset_t.
	(store_ileave_create): Change type of interleave argument and
	variables min_end and end to store_offset_t, but type of variable
	block_size to size_t.
	(store_concat_create): Change type of variable block_size to
	size_t.

	* make.c (_store_create): Change end argument type to store_offset_t.

	* store.h: New type store_offset_t, define to off64_t.
	(struct store_run): Change type of start and length to
	store_offset_t.
	(struct store): Change type of end, wrap_src, wrap_dst, blocks,
	size to store_offset_t.
	Change type of addr arg in store_read_meth_t and
	store_write_meth_t to store_offset_t, as well as in declarations
	for store_read and store_write.
	Change type of argument end in _store_create declaration to
	store_offset_t.
	Change type of argument size in store_zero_create to
	store_offset_t. Change type of argument interleace in
	store_ileace_create to store_offset_t.

	* rdwr.c (store_find_first_run): Change type of return value, addr
	and *base arguments, and variables wrap_src and run_blocks to
	store_offset_t.
	(store_next_run): Change type of *base argument to store_offset_t.
	(store_write): Change type of addr argument and variable base to
	store_offset_t.
	(store_read): Likewise, also for addr argument of local function seg_read.
	Change type of len argument to size_t.

	* copy.c (copy_read): Change type of addr argument to store_offset_t.
	(copy_write): Likewise.
	* device.c (dev_read): Likewise.
	(dev_write): Likewise.
	* file.c (file_read): Likewise.
	(file_write): Likewise.
	(file_byte_read): Likewise.
	(file_byte_write): Likewise.
	* mvol.c (mvol_read): Likewise.
	(mvol_write): Likewise.
	* remap.c (remap_read): Likewise.
	(remap_write): Likewise.
	* stripe.c (stripe_read): Likewise.
	(stripe_write): Likewise.
	* task.c (task_read): Likewise.
	(task_write): Likewise.
	* zero.c (zero_read): Likewise.
	(zero_write): Likewise.

	* remap.c (store_remap_runs): Change type of addr and len
	arguments of local function add_run and of local variables addr,
	length, baddr, blen and len to store_offset_t.
	(remap_open): Cast -1 to store_offset_t, not off_t.

	* argp.c (struct store_parsed): Change type of interleave from
	off_t to store_offset_t.
	(store_parsed_append_args): Use %Ld instead %ld to print
	interleave value.
	(store_parsed_name): Likewise.

ufs/
2001-01-08  Marcus Brinkmann  <marcus@gnu.org>

	* main.c (main): Use %Ld instead %ld to print store->size.
	* hyper.c (get_hypermetadata): Likewise.
	* inode.c (diskfs_S_file_get_storage_info): Change type of variables
	start and length from off_t to store_offset_t.

utils/
2001-01-08  Marcus Brinkmann  <marcus@gnu.org>

	* storeread.c (main): Change type of addr to store_offset_t,
	also for first argument of local function dump.
	Add comment about store->size as len parameter for store_read.
	Use atoll instead atoi for addr argument.

	* storeinfo.c (print_store): Remove local function pint, add two
	similar functions psiz and poff, accepting and printing a size_t
	or store_offset_t respectively.
	Use psiz to print block_size, poff to print blocks and size of
	store.
	Use %Ld instead %ld to print runs.

	* storecat.c (main): Change type of addr and left to store_offset_t.

2 files changed, 11 insertions, 5 deletions

diff --git a/doc/ChangeLog b/doc/ChangeLog
index 188ad440..e0f6405c 100644
--- a/doc/ChangeLog
+++ b/doc/ChangeLog
@@ -1,3 +1,9 @@
+2001-01-08  Marcus Brinkmann  <marcus@gnu.org>
+
+	* hurd.texi (Store Management): Replace off_t with store_offset_t.
+	(Store I/O): Likewise.
+	(Store Classes): Likewise.
+
 2001-01-07  Marcus Brinkmann  <marcus@gnu.org>
 
 	* hurd.texi (Diskfs Callbacks): Make diskfs_dirstat_size const.
diff --git a/doc/hurd.texi b/doc/hurd.texi
index 9097163c..26adffb9 100644
--- a/doc/hurd.texi
+++ b/doc/hurd.texi
@@ -3032,7 +3032,7 @@ reference to the source from which it was created.
 Clean up and deallocate @var{store}'s underlying stores.
 @end deftypefun
 
-@deftypefn {Structure} struct store_run @{ @w{off_t @var{start}}, @var{length}; @}
+@deftypefn {Structure} struct store_run @{ @w{store_offset_t @var{start}}, @var{length}; @}
 A @code{struct store_run} represents a contiguous region in a store's
 address range.  These are used to designate active portions of a store.
 If @var{start} is -1, then the region is a @dfn{hole} (it is zero-filled
@@ -3113,7 +3113,7 @@ the routines below to get a pager.
 @end ignore
 @end deftypefun
 
-@deftypefun error_t store_read (@w{struct store *@var{store}}, @w{off_t @var{addr}}, @w{size_t @var{amount}}, @w{void **@var{buf}}, @w{size_t *@var{len}})
+@deftypefun error_t store_read (@w{struct store *@var{store}}, @w{store_offset_t @var{addr}}, @w{size_t @var{amount}}, @w{void **@var{buf}}, @w{size_t *@var{len}})
 Read @var{amount} bytes from @var{store} at @var{addr} into @var{buf}
 and @var{len} (which follows the usual Mach buffer-return semantics) to
 @var{store} at @var{addr}.  @var{addr} is in @var{blocks} (as defined by
@@ -3124,7 +3124,7 @@ and @var{len} (which follows the usual Mach buffer-return semantics) to
 @c `microkernel'?
 @c  tb: nope, Mach-specific semantics.
 
-@deftypefun error_t store_write (@w{struct store *@var{store}}, @w{off_t @var{addr}}, @w{void *@var{buf}}, @w{size_t @var{len}}, @w{size_t *@var{amount}})
+@deftypefun error_t store_write (@w{struct store *@var{store}}, @w{store_offset_t @var{addr}}, @w{void *@var{buf}}, @w{size_t @var{len}}, @w{size_t *@var{amount}})
 Write @var{len} bytes from @var{buf} to @var{store} at @var{addr}.
 Returns the amount written in @var{amount} (in bytes).  @var{addr} is in
 @var{blocks} (as defined by @code{@var{store}->block_size}).
@@ -3264,7 +3264,7 @@ has been written into it.  This store corresponds to the Unix
 @file{/dev/zero} device node.
 @end deftypevar
 
-@deftypefun error_t store_zero_create (@w{off_t @var{size}}, @w{int @var{flags}}, @w{struct store **@var{store}})
+@deftypefun error_t store_zero_create (@w{store_offset_t @var{size}}, @w{int @var{flags}}, @w{struct store **@var{store}})
 Return a new zero store @var{size} bytes long in @var{store}.
 @end deftypefun
 
@@ -3378,7 +3378,7 @@ are not as reliable as others, failures will wipe out every @var{n}th
 storage block, where @var{n} is the number of substores.
 @end deftypevar
 
-@deftypefun error_t store_ileave_create (@w{struct store * const *@var{stripes}}, @w{size_t @w{num_stripes}}, @w{off_t @var{interleave}}, @w{int @var{flags}}, @w{struct store **@var{store}})
+@deftypefun error_t store_ileave_create (@w{struct store * const *@var{stripes}}, @w{size_t @w{num_stripes}}, @w{store_offset_t @var{interleave}}, @w{int @var{flags}}, @w{struct store **@var{store}})
 Return a new store in @var{store} that interleaves all the stores in
 @var{stripes} (@var{num_stripes} of them) every @var{interleave} bytes;
 @var{interleave} must be an integer multiple of each stripe's block