/* fmv18x.c: A network device driver for the Fujitsu FMV-181/182/183/184. Original: at1700.c (1993-94 by Donald Becker). Copyright 1993 United States Government as represented by the Director, National Security Agency. The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O Center of Excellence in Space Data and Information Sciences Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771 Modified by Yutaka TAMIYA (tamy@flab.fujitsu.co.jp) Copyright 1994 Fujitsu Laboratories Ltd. Special thanks to: Masayoshi UTAKA (utaka@ace.yk.fujitsu.co.jp) for testing this driver. H. NEGISHI (agy, negishi@sun45.psd.cs.fujitsu.co.jp) for suggestion of some program modification. Masahiro SEKIGUCHI for suggestion of some program modification. Kazutoshi MORIOKA (morioka@aurora.oaks.cs.fujitsu.co.jp) for testing this driver. This software may be used and distributed according to the terms of the GNU Public License, incorporated herein by reference. This is a device driver for the Fujitsu FMV-181/182/183/184, which is a straight-forward Fujitsu MB86965 implementation. Sources: at1700.c The Fujitsu MB86965 datasheet. The Fujitsu FMV-181/182 user's guide */ static const char *version = "fmv18x.c:v1.3.71e 03/04/96 Yutaka TAMIYA (tamy@flab.fujitsu.co.jp)\n"; #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static int fmv18x_probe_list[] = {0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0}; /* use 0 for production, 1 for verification, >2 for debug */ #ifndef NET_DEBUG #define NET_DEBUG 1 #endif static unsigned int net_debug = NET_DEBUG; typedef unsigned char uchar; /* Information that need to be kept for each board. */ struct net_local { struct enet_statistics stats; long open_time; /* Useless example local info. */ uint tx_started:1; /* Number of packet on the Tx queue. */ uchar tx_queue; /* Number of packet on the Tx queue. */ ushort tx_queue_len; /* Current length of the Tx queue. */ }; /* Offsets from the base address. */ #define STATUS 0 #define TX_STATUS 0 #define RX_STATUS 1 #define TX_INTR 2 /* Bit-mapped interrupt enable registers. */ #define RX_INTR 3 #define TX_MODE 4 #define RX_MODE 5 #define CONFIG_0 6 /* Misc. configuration settings. */ #define CONFIG_1 7 /* Run-time register bank 2 definitions. */ #define DATAPORT 8 /* Word-wide DMA or programmed-I/O dataport. */ #define TX_START 10 #define COL16CNTL 11 #define MODE13 13 /* Fujitsu FMV-18x Card Configuration */ #define FJ_STATUS0 0x10 #define FJ_STATUS1 0x11 #define FJ_CONFIG0 0x12 #define FJ_CONFIG1 0x13 #define FJ_MACADDR 0x14 /* 0x14 - 0x19 */ #define FJ_BUFCNTL 0x1A #define FJ_BUFDATA 0x1C #define FMV18X_IO_EXTENT 32 /* Index to functions, as function prototypes. */ extern int fmv18x_probe(struct device *dev); static int fmv18x_probe1(struct device *dev, short ioaddr); static int net_open(struct device *dev); static int net_send_packet(struct sk_buff *skb, struct device *dev); static void net_interrupt(int irq, void *dev_id, struct pt_regs *regs); static void net_rx(struct device *dev); static int net_close(struct device *dev); static struct enet_statistics *net_get_stats(struct device *dev); static void set_multicast_list(struct device *dev); /* Check for a network adaptor of this type, and return '0' iff one exists. If dev->base_addr == 0, probe all likely locations. If dev->base_addr == 1, always return failure. If dev->base_addr == 2, allocate space for the device and return success (detachable devices only). */ #ifdef HAVE_DEVLIST /* Support for a alternate probe manager, which will eliminate the boilerplate below. */ struct netdev_entry fmv18x_drv = {"fmv18x", fmv18x_probe1, FMV18X_IO_EXTENT, fmv18x_probe_list}; #else int fmv18x_probe(struct device *dev) { int i; int base_addr = dev ? dev->base_addr : 0; if (base_addr > 0x1ff) /* Check a single specified location. */ return fmv18x_probe1(dev, base_addr); else if (base_addr != 0) /* Don't probe at all. */ return ENXIO; for (i = 0; fmv18x_probe_list[i]; i++) { int ioaddr = fmv18x_probe_list[i]; if (check_region(ioaddr, FMV18X_IO_EXTENT)) continue; if (fmv18x_probe1(dev, ioaddr) == 0) return 0; } return ENODEV; } #endif /* The Fujitsu datasheet suggests that the NIC be probed for by checking its "signature", the default bit pattern after a reset. This *doesn't* work -- there is no way to reset the bus interface without a complete power-cycle! It turns out that ATI came to the same conclusion I did: the only thing that can be done is checking a few bits and then diving right into MAC address check. */ int fmv18x_probe1(struct device *dev, short ioaddr) { char irqmap[4] = {3, 7, 10, 15}; unsigned int i, irq; /* Resetting the chip doesn't reset the ISA interface, so don't bother. That means we have to be careful with the register values we probe for. */ /* Check I/O address configuration and Fujitsu vendor code */ if (fmv18x_probe_list[inb(ioaddr + FJ_CONFIG0) & 0x07] != ioaddr || inb(ioaddr+FJ_MACADDR ) != 0x00 || inb(ioaddr+FJ_MACADDR+1) != 0x00 || inb(ioaddr+FJ_MACADDR+2) != 0x0e) return -ENODEV; irq = irqmap[(inb(ioaddr + FJ_CONFIG0)>>6) & 0x03]; /* Snarf the interrupt vector now. */ if (request_irq(irq, &net_interrupt, 0, "fmv18x", NULL)) { printk ("FMV-18x found at %#3x, but it's unusable due to a conflict on" "IRQ %d.\n", ioaddr, irq); return EAGAIN; } /* Allocate a new 'dev' if needed. */ if (dev == NULL) dev = init_etherdev(0, sizeof(struct net_local)); /* Grab the region so that we can find another board if the IRQ request fails. */ request_region(ioaddr, FMV18X_IO_EXTENT, "fmv18x"); printk("%s: FMV-18x found at %#3x, IRQ %d, address ", dev->name, ioaddr, irq); dev->base_addr = ioaddr; dev->irq = irq; irq2dev_map[irq] = dev; for(i = 0; i < 6; i++) { unsigned char val = inb(ioaddr + FJ_MACADDR + i); printk("%02x", val); dev->dev_addr[i] = val; } /* "FJ_STATUS0" 12 bit 0x0400 means use regular 100 ohm 10baseT signals, rather than 150 ohm shielded twisted pair compensation. 0x0000 == auto-sense the interface 0x0800 == use TP interface 0x1800 == use coax interface */ { const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2/5"}; ushort setup_value = inb(ioaddr + FJ_STATUS0); switch( setup_value & 0x07 ){ case 0x01 /* 10base5 */: case 0x02 /* 10base2 */: dev->if_port = 0x18; break; case 0x04 /* 10baseT */: dev->if_port = 0x08; break; default /* auto-sense*/: dev->if_port = 0x00; break; } printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]); } /* Initialize LAN Controller and LAN Card */ outb(0xda, ioaddr + CONFIG_0); /* Initialize LAN Controller */ outb(0x00, ioaddr + CONFIG_1); /* Stand by mode */ outb(0x00, ioaddr + FJ_CONFIG1); /* Disable IRQ of LAN Card */ outb(0x00, ioaddr + FJ_BUFCNTL); /* Reset ? I'm not sure (TAMIYA) */ /* wait for a while */ udelay(200); /* Set the station address in bank zero. */ outb(0x00, ioaddr + CONFIG_1); for (i = 0; i < 6; i++) outb(dev->dev_addr[i], ioaddr + 8 + i); /* Switch to bank 1 and set the multicast table to accept none. */ outb(0x04, ioaddr + CONFIG_1); for (i = 0; i < 8; i++) outb(0x00, ioaddr + 8 + i); /* Switch to bank 2 and lock our I/O address. */ outb(0x08, ioaddr + CONFIG_1); outb(dev->if_port, ioaddr + MODE13); if (net_debug) printk("%s", version); /* Initialize the device structure. */ dev->priv = kmalloc(sizeof(struct net_local), GFP_KERNEL); if (dev->priv == NULL) return -ENOMEM; memset(dev->priv, 0, sizeof(struct net_local)); dev->open = net_open; dev->stop = net_close; dev->hard_start_xmit = net_send_packet; dev->get_stats = net_get_stats; dev->set_multicast_list = &set_multicast_list; /* Fill in the fields of 'dev' with ethernet-generic values. */ ether_setup(dev); return 0; } static int net_open(struct device *dev) { struct net_local *lp = (struct net_local *)dev->priv; int ioaddr = dev->base_addr; /* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit bus access, and two 4K Tx, enable the Rx and Tx. */ outb(0x5a, ioaddr + CONFIG_0); /* Powerup and switch to register bank 2 for the run-time registers. */ outb(0xe8, ioaddr + CONFIG_1); lp->tx_started = 0; lp->tx_queue = 0; lp->tx_queue_len = 0; /* Clear Tx and Rx Status */ outb(0xff, ioaddr + TX_STATUS); outb(0xff, ioaddr + RX_STATUS); lp->open_time = jiffies; dev->tbusy = 0; dev->interrupt = 0; dev->start = 1; /* Enable the IRQ of the LAN Card */ outb(0x80, ioaddr + FJ_CONFIG1); /* Enable both Tx and Rx interrupts */ outw(0x8182, ioaddr+TX_INTR); MOD_INC_USE_COUNT; return 0; } static int net_send_packet(struct sk_buff *skb, struct device *dev) { struct net_local *lp = (struct net_local *)dev->priv; int ioaddr = dev->base_addr; if (dev->tbusy) { /* If we get here, some higher level has decided we are broken. There should really be a "kick me" function call instead. */ int tickssofar = jiffies - dev->trans_start; if (tickssofar < 10) return 1; printk("%s: transmit timed out with status %04x, %s?\n", dev->name, htons(inw(ioaddr + TX_STATUS)), inb(ioaddr + TX_STATUS) & 0x80 ? "IRQ conflict" : "network cable problem"); printk("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n", dev->name, htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)), htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)), htons(inw(ioaddr + 8)), htons(inw(ioaddr +10)), htons(inw(ioaddr +12)), htons(inw(ioaddr +14))); printk("eth card: %04x %04x\n", htons(inw(ioaddr+FJ_STATUS0)), htons(inw(ioaddr+FJ_CONFIG0))); lp->stats.tx_errors++; /* ToDo: We should try to restart the adaptor... */ cli(); /* Initialize LAN Controller and LAN Card */ outb(0xda, ioaddr + CONFIG_0); /* Initialize LAN Controller */ outb(0x00, ioaddr + CONFIG_1); /* Stand by mode */ outb(0x00, ioaddr + FJ_CONFIG1); /* Disable IRQ of LAN Card */ outb(0x00, ioaddr + FJ_BUFCNTL); /* Reset ? I'm not sure */ net_open(dev); sti(); } /* If some higher layer thinks we've missed an tx-done interrupt we are passed NULL. Caution: dev_tint() handles the cli()/sti() itself. */ if (skb == NULL) { dev_tint(dev); return 0; } /* Block a timer-based transmit from overlapping. This could better be done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */ if (set_bit(0, (void*)&dev->tbusy) != 0) printk("%s: Transmitter access conflict.\n", dev->name); else { short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; unsigned char *buf = skb->data; if (length > ETH_FRAME_LEN) { if (net_debug) printk("%s: Attempting to send a large packet (%d bytes).\n", dev->name, length); return 1; } if (net_debug > 4) printk("%s: Transmitting a packet of length %lu.\n", dev->name, (unsigned long)skb->len); /* Disable both interrupts. */ outw(0x0000, ioaddr + TX_INTR); outw(length, ioaddr + DATAPORT); outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1); lp->tx_queue++; lp->tx_queue_len += length + 2; if (lp->tx_started == 0) { /* If the Tx is idle, always trigger a transmit. */ outb(0x80 | lp->tx_queue, ioaddr + TX_START); lp->tx_queue = 0; lp->tx_queue_len = 0; dev->trans_start = jiffies; lp->tx_started = 1; dev->tbusy = 0; } else if (lp->tx_queue_len < 4096 - 1502) /* Yes, there is room for one more packet. */ dev->tbusy = 0; /* Re-enable interrupts */ outw(0x8182, ioaddr + TX_INTR); } dev_kfree_skb (skb, FREE_WRITE); return 0; } /* The typical workload of the driver: Handle the network interface interrupts. */ static void net_interrupt(int irq, void *dev_id, struct pt_regs *regs) { struct device *dev = (struct device *)(irq2dev_map[irq]); struct net_local *lp; int ioaddr, status; if (dev == NULL) { printk ("fmv18x_interrupt(): irq %d for unknown device.\n", irq); return; } dev->interrupt = 1; ioaddr = dev->base_addr; lp = (struct net_local *)dev->priv; /* Avoid multiple interrupts. */ outw(0x0000, ioaddr + TX_INTR); status = inw(ioaddr + TX_STATUS); outw(status, ioaddr + TX_STATUS); if (net_debug > 4) printk("%s: Interrupt with status %04x.\n", dev->name, status); if (status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0) { /* Got a packet(s). */ net_rx(dev); } if (status & 0x00ff) { if (status & 0x80) { lp->stats.tx_packets++; if (lp->tx_queue) { outb(0x80 | lp->tx_queue, ioaddr + TX_START); lp->tx_queue = 0; lp->tx_queue_len = 0; dev->trans_start = jiffies; dev->tbusy = 0; mark_bh(NET_BH); /* Inform upper layers. */ } else { lp->tx_started = 0; dev->tbusy = 0; mark_bh(NET_BH); /* Inform upper layers. */ } } if (status & 0x02 ) { if (net_debug > 4) printk("%s: 16 Collision occur during Txing.\n", dev->name); /* Retry to send the packet */ outb(0x02, ioaddr + COL16CNTL); } } dev->interrupt = 0; outw(0x8182, ioaddr + TX_INTR); return; } /* We have a good packet(s), get it/them out of the buffers. */ static void net_rx(struct device *dev) { struct net_local *lp = (struct net_local *)dev->priv; int ioaddr = dev->base_addr; int boguscount = 10; /* 5 -> 10: by agy 19940922 */ while ((inb(ioaddr + RX_MODE) & 0x40) == 0) { /* Clear PKT_RDY bit: by agy 19940922 */ /* outb(0x80, ioaddr + RX_STATUS); */ ushort status = inw(ioaddr + DATAPORT); if (net_debug > 4) printk("%s: Rxing packet mode %02x status %04x.\n", dev->name, inb(ioaddr + RX_MODE), status); #ifndef final_version if (status == 0) { outb(0x05, ioaddr + 14); break; } #endif if ((status & 0xF0) != 0x20) { /* There was an error. */ lp->stats.rx_errors++; if (status & 0x08) lp->stats.rx_length_errors++; if (status & 0x04) lp->stats.rx_frame_errors++; if (status & 0x02) lp->stats.rx_crc_errors++; if (status & 0x01) lp->stats.rx_over_errors++; } else { ushort pkt_len = inw(ioaddr + DATAPORT); /* Malloc up new buffer. */ struct sk_buff *skb; if (pkt_len > 1550) { printk("%s: The FMV-18x claimed a very large packet, size %d.\n", dev->name, pkt_len); outb(0x05, ioaddr + 14); lp->stats.rx_errors++; break; } skb = dev_alloc_skb(pkt_len+3); if (skb == NULL) { printk("%s: Memory squeeze, dropping packet (len %d).\n", dev->name, pkt_len); outb(0x05, ioaddr + 14); lp->stats.rx_dropped++; break; } skb->dev = dev; skb_reserve(skb,2); insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1); if (net_debug > 5) { int i; printk("%s: Rxed packet of length %d: ", dev->name, pkt_len); for (i = 0; i < 14; i++) printk(" %02x", skb->data[i]); printk(".\n"); } skb->protocol=eth_type_trans(skb, dev); netif_rx(skb); lp->stats.rx_packets++; } if (--boguscount <= 0) break; } /* If any worth-while packets have been received, dev_rint() has done a mark_bh(NET_BH) for us and will work on them when we get to the bottom-half routine. */ { int i; for (i = 0; i < 20; i++) { if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40) break; (void)inw(ioaddr + DATAPORT); /* dummy status read */ outb(0x05, ioaddr + 14); } if (net_debug > 5 && i > 0) printk("%s: Exint Rx packet with mode %02x after %d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i); } return; } /* The inverse routine to net_open(). */ static int net_close(struct device *dev) { int ioaddr = dev->base_addr; ((struct net_local *)dev->priv)->open_time = 0; dev->tbusy = 1; dev->start = 0; /* Set configuration register 0 to disable Tx and Rx. */ outb(0xda, ioaddr + CONFIG_0); /* Update the statistics -- ToDo. */ /* Power-down the chip. Green, green, green! */ outb(0x00, ioaddr + CONFIG_1); MOD_DEC_USE_COUNT; /* Set the ethernet adaptor disable IRQ */ outb(0x00, ioaddr + FJ_CONFIG1); return 0; } /* Get the current statistics. This may be called with the card open or closed. */ static struct enet_statistics * net_get_stats(struct device *dev) { struct net_local *lp = (struct net_local *)dev->priv; cli(); /* ToDo: Update the statistics from the device registers. */ sti(); return &lp->stats; } /* Set or clear the multicast filter for this adaptor. num_addrs == -1 Promiscuous mode, receive all packets num_addrs == 0 Normal mode, clear multicast list num_addrs > 0 Multicast mode, receive normal and MC packets, and do best-effort filtering. */ static void set_multicast_list(struct device *dev) { short ioaddr = dev->base_addr; if (dev->mc_count || dev->flags&(IFF_PROMISC|IFF_ALLMULTI)) { /* * We must make the kernel realise we had to move * into promisc mode or we start all out war on * the cable. - AC */ dev->flags|=IFF_PROMISC; outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */ } else outb(2, ioaddr + RX_MODE); /* Disable promiscuous, use normal mode */ } #ifdef MODULE static char devicename[9] = { 0, }; static struct device dev_fmv18x = { devicename, /* device name is inserted by linux/drivers/net/net_init.c */ 0, 0, 0, 0, 0, 0, 0, 0, 0, NULL, fmv18x_probe }; static int io = 0x220; static int irq = 0; int init_module(void) { if (io == 0) printk("fmv18x: You should not use auto-probing with insmod!\n"); dev_fmv18x.base_addr = io; dev_fmv18x.irq = irq; if (register_netdev(&dev_fmv18x) != 0) { printk("fmv18x: register_netdev() returned non-zero.\n"); return -EIO; } return 0; } void cleanup_module(void) { unregister_netdev(&dev_fmv18x); kfree(dev_fmv18x.priv); dev_fmv18x.priv = NULL; /* If we don't do this, we can't re-insmod it later. */ free_irq(dev_fmv18x.irq, NULL); irq2dev_map[dev_fmv18x.irq] = NULL; release_region(dev_fmv18x.base_addr, FMV18X_IO_EXTENT); } #endif /* MODULE */ /* * Local variables: * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c fmv18x.c" * version-control: t * kept-new-versions: 5 * tab-width: 4 * c-indent-level: 4 * End: */