Frequently Asked Questions about the GNU Hurd This document attempts to answer the questions that most often plague users when they are talking about, installing, using, compiling and developing the GNU Hurd as well as its binary distribution Debian GNU/Hurd. Be sure to read this before asking for help. The GNU Hurd is under active development and a stable version has not yet been released. Be aware that: there is a lot of work yet to be completed; you will find bugs; your system will crash. That said, there is a lot of room for contributions at all levels: development of the Hurd and Mach proper, porting applications, writing documentation and, most importantly, user feedback. Should you have a question that is not answered by this document and you feel that it should be, submit it and, if possible, with an answer. Each section is copyright its respective author(s). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts and with no Back-Cover Texts. A copy of the license is included in the file COPYRIGHT. Neal H Walfield neal@cs.uml.edu ? Installation ?? What partition type should I use for my GNU/Hurd partitions? {MB} You should use an ext2 filesystem. Alternatively, you may use BSD style ufs. The partition type number for ext2fs is 0x83 (this is the same as in Linux), not 0x63 (GNU HURD). Thomas explains why 0x63 is the wrong choice: One day we may have a new filesystem format, which would probably be called the GNU Hurd filesystem format, and might well use that partition code. Regardless, as Roland points out, it is always an error to use that code for an ext2fs partition, ?? How do I name partitions? {MB,NHW} I knew you would ask this. If I had to reduce this FAQ to only one question, I'd choose this one. It is pretty easy, but you have to know that there are actually several incompatibly naming convention. First, the Hurd: if the disk is question is a SCSI disk, you must know the SCSI device number; if it is an IDE disk, you must know what controller the disk is on and whether it is a master or a slave. The Hurd uses the BSD naming convention which, is to say, disks are ordered according to their physical location, numerically, starting from zero. This naming scheme is quite similar to that found in Linux. There, the master disk on the primary controller is designated as `hda' and the slave as `hdb'. On the secondary controller, the master and the slave are designated by `hdc' and `hdd' respectively. Under the Hurd, `hda' would become `hd0', `hdb' would be referred to as `hd1', etc. In the Hurd, like in BSD, partitions are called `slices' and are numbered starting from one. Thus, to name a particular partition, we take the disk name, append a `s' and the partition number. Again, this is similar to Linux except, there is no `s'. For instance, `hda1' would become `hd0s1'. GRUB, the boot loader, uses a completely different nomenclature: it probes the BIOS and appends each disk in turn to an array. Both disks and partitions are enumerated using zero based arrays. The format is: `hd (, )'. Thus, `hd (0, 1)' refers to the second partition on the first drive detected by the BIOS. As Grub now has tab completion, there is not a lot of guess work. ?? Can I use partitions larger than 2GB? {MB} No, not currently. The filesystem servers need to be changed to not map the whole store into memory, which is not too difficult. For large files, some interfaces need to be changed, which is a bit harder but still doable. ?? How much swap do I need? {NHW} Generally, a lot; once you run out, Mach panics. I have at least 128MB of ram and 256MB of swap on all of machines running GNU/Hurd. ?? Can I share swap space between GNU/Linux and GNU/Hurd? {NHW} Yes. The default pager recognises and respects Linux swap partitions. It will also swap to a raw partition, i.e. anything that it does not recognize as Linux swap. Therefore: BE CAREFUL. ?? Why do I get ``Operation not permitted error''? {MB} You forgot to set the file system owner of the GNU/Hurd partition to ``hurd''. The Hurd uses additional information in the inodes to set translators. To make this work, the partition must be marked as ``owned by the Hurd''. This is normally done by passing the `-o hurd' option to `mke2fs' when creating ext2 system from other operating systems (filesystems created in GNU/Hurd automatically enable this option). If you failed to do this, you can still use the `e2os' script. ?? After `native-install' is finished, I had to write tthhiiss wwaayy. In particular, I had to type `rreebboooott' to reboot. {MB} Funny, isn't it? In addition to the rescue `term' server in `/tmp/console', another `term' server got started and is clobbing the keyboard input. After a reboot this problem vanishes as only one `term' server will remain. If `tar' would support translator, we would not have this problem... Even if you don't experience this problem right after the installation, reboot immediately so you don't hit this bug by accident. ? Setup ?? How do I add a swap partition? {MB} A swap partition is also called a paging file. Usually, it is sufficient to add the swap partition to `/etc/fstab', just as you would under Linux. You can swap to a Linux swap partition and the Hurd will honour the Linux swap signature (both versions). The Hurd will just as happily swap to any other raw disk space and overwrite anything it finds. So, be careful! If you want to swap to a file or make sure that it checks the Linux swap signature before, you need to edit `/boot/servers.boot'. The syntax is the partition device file name plus, optionally, the swap file inside an ext2fs partition, followed by a space and then one of: `$(add-raw-paging-file)', `$(add-linux-paging-file)', `$(add-paging-file)'. The first works with any partition or file and does not honour any swap signature or other data. The second has a safety check and only uses the file if a Linux swap signature is found. The third looks for a swap signature first and falls back to raw paging if it failed to find one. This is also the default for entries in `/etc/fstab'. ?? How do I set up a network? How do I set up a loopback device? {MB} In the former case, be sure that GNU Mach detected your network card. Either way, you need to setup `pfinet'. Documentation can be found at: http://www.debian.org/ports/hurd/hurd-doc-server#pfinet Don't forget to fill in `/etc/resolv.conf', `/etc/hosts', etc. Of course, you only need to do this if the installation routine didn't do it for you. ?? Can I use the GNU/Linux version of `e2fsck' on a GNU/Hurd partition? {MB} Yes, at least since `e2fsprogs-1.05'. Check this with `e2fsck -V' first. {NHW} Do not try to defrag your partition as this utility does not know about translators. ?? Why are pipes not working? {MB} `settrans -fgc /servers/socket/1 /hurd/pflocal' should help. ? Usage ?? Where is the documentation? {NHW,MM} There are neither man pages nor info nodes for the Hurd translators and commands. Documentation lives inside of the binaries and can be found by passing the `--help' option to a given command. For instance: # /hurd/ext2fs --help will tell you what types of options the ext2fs translator accepts. The GNU/Hurd User's Guide and the GNU Hurd Reference Manual both provide some help about the usage of and concepts behind the GNU Hurd. You can find them, among others, at: http://www.gnu.org/software/hurd/docs.html ?? What is a translator? {MB} There is a text about translators available at: http://www.debian.org/ports/hurd/hurd-doc-translator Read this and ask further questions on the mailing lists. ?? What is the login shell? {MB} The Hurd has the concept of a not-logged in user. This user has neither user ids nor groups ids. This stems from the fact that the Hurd supports uid and gid sets and one possibility is, of course, the empty set. Rather than deny access in this case, filesystems in the Hurd offer a fourth permission triplet (i.e. rwx) which is used to determine the privileges for users with no credentials. This, however, needs to be enabled on a file by file basis. By default, the `other' permission triplet is used. The Hurd login shell is a shell running with neither uids nor gids. To restrict access to your files, either enable and change the fourth permission triplet or change the login shell of the `login' user in the password file to `/bin/loginpr' which implements the standard login prompt. ?? How do I use non-US keyboard bindings? {NHW,FH} Take a look at: http://www.xs4all.nl/~mgerards/xkb8.tar.gz If you want a Debian package, you can add to your 'etc/apt/sources.list' deb http://debian.duckcorp.org/unstable/binary-hurd-i386/ ./ and then run apt-get install console-driver-xkb. ?? How do I enable color on the console? {NHW} If you are using the GNU Mach microkernel, you can set your terminal to `mach-color'. For instance: # export TERM=mach-color ?? How can I enable virtual consoles? {AMS} This can be done by running the following command: console -d vga -d pc_kbd -d generic_speaker /dev/vcs If something went wrong, or if you just wish to exit the Hurd console then hitting C-A- will exit it. ?? What is the status of X? {MB} It works! The packages are available at any Debian ftp mirror. XFree86 4.0.2 is available, as are some of the v3 servers. Instructions on how to use the packages are in the mailing list archive (link follow later). ?? Why does X not work? {MB} Try `export LD_LIBRARY_PATH=/usr/X11R6/lib'. This is a linker issue. GNU/Hurd expects that `RPATH' is used, however, Debian takes certain measures to avoid this. Note that this does not cut it for suid binaries because of security implications. We expect to rectify this by using `RUNPATH', which is specified in the new ELF standard. ?? What are these strange pids `2' and `3'? {MB} Two is the kernel, three is the default pager and four is the root filesystem. ?? Why does `ps aux' give me strange output? {MB,MM} Try `ps Aux'. Indeed, under GNU/Hurd, `ps aux' doesn't list all processes: it omits the session and group leaders, and the processes without parent. ?? I have a hung process that I want to kill, however, `ps' is now hanging too. {MB} Interrupt it and pass it the `-M' option. {NHW} By default, `ps' gathers information from both the proc server and the processes themselves (via their message port). If a process it hung, it will not be able respond to its message port and thus, ps will wait forever. The `-M' option instructs ps to not gather information that would require use of the message port. ?? Where are ... {MB} `fdisk' and `dmesg' are not yet ported. Instead of `free', use `vmstat' and `vminfo'. For kernel messages, read `/dev/klog' directly. Note, once you read this, it is gone forever. ?? Is there a `/proc' filesystem? {MB} No. Maybe there will be an emulation filesystem someday for programs that rely it. If you are wondering about the empty `/proc' directory, this is a relict from a Debian GNU/Linux package (specifically, `base-files'). You can probe for existing hardware devices with the devprobe utility. ?? Why does the command `df' not work? {NHW} It does, you just have to tell it what filesystem to query. E.g. # df / ?? Why are my translators dying? {NHW} Try passing the `-ap' flag to settrans. By default, settrans only sets a passive translator, therefore, no output will show up on your terminal. Using `-ap', however, sets both the active and the passive translator which, means that the translator starts immediately and its stderr is connected to you terminal. Additionally, the biggest problem is passing relative paths to passive translators. You cannot predict what the current working directory of a translator will be when it is setup as a passive translator. ?? Why can I `read' a directory? {MB} It is important to understand that there is nothing special about a directory under the Hurd, it is just another file. This fits in with the translator concept where a translator can appear as a directory but provide also as a file. ? Trouble shooting ?? When the APM support in the BIOS spins down my disk drives, the Hurd is unable to wake up. What's wrong? {MB} APM is not supported in the current version of GNU Mach, sorry. Please disable APM in your BIOS setup. ?? What are these messages referring to `default pager', `paging', and `pager request'? {MB} The default pager handles virtual memory allocation. If it can't allocate a new memory page because you are out of memory, some terrible things may happen. Whenever you get errors referring to any of these, you either need more memory (make sure you have swap) or you have found a memory leak. ?? What is a gratuitous error? {MB} This comes from `strerror(EGRATUITOUS)'. If you check glibc's documentation, it will say that this error code has no purpose. This, however, is not quite true. You only get this when something terrible happens. Thomas explains: More precisely `EGRATUITOUS' officially means that some server has responded in an impossible or protocol-violating fashion. There are some cases in the Hurd where `EGRATUITOUS' is returned and probably something else should be chosen instead. If you can reproduce this error message, please report it. ?? What does ``computer bought the farm'' mean ? {FH} This message is the text that corresponds to the errno code `EIEIO'. Roland McGrath explains: That message is not output by any particular servers at particular times; rather it is the perror text for the errno code EIEIO, which is returned by various RPCs and functions for a variety of "hopeless" error conditions. ?? What does ``/dev/hd0s1: MOUNTED READ-ONLY; MUST USE `fsysopts --writable''' mean? {NHW} In this case, /dev/hd0s1 was not unmounted cleanly. The Hurd will, on boot up, run ``fsck -p'' on any partitions that it finds in /etc/fstab, so, you may want to consider adding this partition to that file. If you are sure that the partition is fine, you can run: # fsysopts /home --writable to ask the translator sitting on /home to change from read-only to read/write mode. Note that the command is being sent to the filesystem and not the store (e.g. /dev/hd0s1). ?? When GNU/Hurd crashes, GNU Mach automatically reboots. Is there anyway I can make it pause so I can write down the error? {MB} Pass the `-H' option to init (add it to the boot command line), and `init' will tell Mach to enter the kernel debugger instead to rebooting it. At the debugger prompt (`db>'), you can type `reboot' any time to reboot the system. ? Porting ?? What programs have been ported? {NHW} A lot, take a look at the Debian archive. Many programs, however, do not necessarily need to be ported; they have just never been compiled. ?? Is porting easy? {NHW} Porting applications to GNU/Hurd is relatively easy assuming the application is POSIX compliant as GNU/Hurd does its best to be a conforming operating system. The most common error made by programmers is assuming the MAXPATHLEN and PATH_MAX are defined. On most operating systems this is set to a few thousand, however, on GNU/Hurd, there is no maximum and thus, this is not set. The correct thing to do is to submit a patch to the upstream author that allocates memory dynamically. ?? How can I help? {NHW} A effort to compile all of the Debian packages is underway by Jeff Bailey. Take a look at: http://people.debian.org/~jbailey/oasis/group/Debian/index.html to see what has been done and how you can help. ? Compiling ?? Where can I get the source? {AMS} Instructions on how to download the CVS tree from Savanah are avaiable at https://savannah.gnu.org/cvs/?group=hurd {NHW} To get the source to the latest debian package, look on any debian mirror. ?? Can I cross compile? {NHW} Yes. If you are running Debian GNU/Linux on IA32, this is quite easy as there is a cheap cross compiler available; all that is required is installing the gcc-i386-gnu and mig-i386-gnu Debian packages. When running configure, you will have to specify tools directly: # MIG=/usr/bin/i386-gnu-mig CC=/usr/bin/i386-gnu-gcc \ ../src/hurd/configure ... If you are running another distribution, you will have to do this the long way. You can find instructions at the Cross Compiling HOW-TO available at: http://hurddocs.sourceforge.net/howto/cross.html Farid Hajji also talks about his experiences at: http://lists.debian.org/debian-hurd-0012/msg00062.html ?? Any general tips? {NHW} Yeah, building in the source tree is untested. Try: # ../src/hurd/configure ... ? Development ?? What is OSKit-Mach? {NHW,FH} There are two versions of GNU Mac that are in use: GNU Mach 1.x and GNU Mach 2.x, formerly known as OSKit-Mach. The former uses the drivers from Linux 2.0.x while the latter uses the University of Utah's OSKit library for drivers. You can find out more about the OSKit library at: http://www.cs.utah.edu/flux/oskit GNU Mach 2.x is usable, but some things are still missing or not working, like the serial port and scsi drivers. This is why GNU Mach 2.0 hasn't released yet and the two versions coexist. ?? Where is the documentation? {NHW} There were several books written on the Mach kernel. The information that they contain is still mostly pertinent and should be considered required reading for potential hackers. They can be found at: http://www.cs.cmu.edu/afs/cs/project/mach/public/www/doc/publications.html The documentation for the Hurd is quite inadequate. The starting of a book, ``The GNU Hurd'' is in the doc directory in the Hurd source. You can read this using: # info hurd The authoritative place is, of course, the source code; that does not, however, mean that we would not welcome more documentation. To get started, take a look at /doc/navigating. ?? How do I make sure that my code is POSIX compliant? {NHW} Unfortunately, you have to buy the POSIX standard from IEEE. The Single Unix Specification version 2, a superset of POSIX, is available for free on the Internet. Try: http://www.unix-systems.org/online.html ?? Who do I submit patches to? {NHW} If they are against the Hurd, Mach or MiG, send a patch to the bug-hurd mailing list. If they are against other packages, the Debian BTS is a good place. In this case, be sure to advise the debian-hurd mailing list of the bug. ?? In what format should patches for the Hurd and GNU Mach be? {MB} All patches should be sent in unified context diff format (option `-u' to GNU diff). It is helpful for us if you also use the `-p' option which includes information about the function changed by a patch. Changes that are similar can be grouped together in one file, but unrelated changes should be sent in seperate files. The patches can be included in the message or as a MIME attachement. They should not be compressed and/or archived unless they are very large, and if they are very large it is probably better to store them on-line at some place and only sent an URL. Write a ChangeLog entry for each change, following the format of the existing files. Here is an example: 2000-12-02 Marcus Brinkmann * ops.c (op_readlink): Before returning, check if the buffer pointed to by transp is ours. If not, munmap it. (op_read): Likewise for bp. (op_readdir): Don't alloca a buffer here. Instead initialize BUF and BUFSIZE to 0 and let the server (eh, MiG) do it. munmap BUF before returning. The file name and the name of the function changed should always be spelled out completely, and not abbreviated or otherwise mangled (like foo.{c,h}), because that would make searching for all changes to a file or function impossible. Local variable names are all capitalized. There are two spaces between sentences. You can use ``C-x 4 a'' in Emacs to add a new ChangeLog entry. If you do that with the mark being in a function, Emacs will automatically fill in the file and function name for you. Do not send in a patch for the ChangeLog file. Rather include the ChangeLog entries in the message that contains the patch. Patches for ChangeLog files often conflict. If you have the original source tree in the directory `hurd-orig', and the modified source tree in the directory `hurd', the following command will produce a good patch (please make sure there are no extra files like backups in the modified tree, or leave away the option `-N'). You will need to collect the ChangeLog entries seperately. # diff -x ChangeLog -Nurp hurd-orig hurd Answers were given by (in chronological order): * {NHW} Neal H Walfield * {MB} Marcus Brinkmann * {AMS} Alfred M. Szmidt * {OK} Ognyan Kulev * {FH} Frédéric Henry * {MM} Manuel Menal vim:ts=8:sw=8:tw=72