path: root/hurd/subhurd.mdwn
diff options
Diffstat (limited to 'hurd/subhurd.mdwn')
1 files changed, 40 insertions, 21 deletions
diff --git a/hurd/subhurd.mdwn b/hurd/subhurd.mdwn
index 7b6cad6..f04e0f5 100644
--- a/hurd/subhurd.mdwn
+++ b/hurd/subhurd.mdwn
@@ -27,12 +27,47 @@ requires a privileged subhurd.
# Howto
-## Preparing
+## Quick hack: Use an existing image
-To run a subhurd, you need an additional partition with an installed Hurd
-system. In principle, you can also use your main partition in read-only mode;
-but this obviously will create severe limitations. Usually, you will want a
-complete independent system.
+You can download a Debian/Hurd image
+[[here|]] and directly
+boot it:
+ $ wget --no-check-certificate
+ $ gunzip debian-hurd.img.gz
+ $ boot --kernel-command-line="fastboot root=pseudo-root" -T typed part:1:file:debian-hurd.img
+The 'fastboot' is necessary to skip the filesystem check which fails
+because the image assumes the root filesystem to be /etc/hd0s1. Once
+booted, you can correct this:
+ root@debian:~# settrans -c /dev/pseudo-root /hurd/storeio pseudo-root
+ root@debian:~# echo /dev/pseudo-root / ext2 defaults 0 1 >/etc/fstab
+ root@debian:~# halt
+From now on, `boot -T typed part:1:file:debian-hurd.img` should suffice.
+## Preparing your own image
+To run a subhurd, you need an additional partition (or a file) with an
+installed Hurd system. In principle, you can also use your main
+partition in read-only mode; but this obviously will create severe
+limitations. Usually, you will want a complete independent system.
+The following instructions assume that the system is installed on
+`/dev/hd0s1`. You can use any partition instead, or in fact just a
+simple file created e.g. using dd.
+### Creating a file used as root filesystem for the Subhurd
+To create a file `my.image` of size 2 gigabytes, do
+ $ dd if=/dev/zero of=my.image bs=1M count=1 seek=2000
+(Note that it is currently problematic to create files larger than 2
+gigabytes this way.)
+### Using debootstrap
The system for the subhurd is a normal Hurd installation, which could just as
well run standalone. You can use any of the various possible installation
@@ -45,22 +80,6 @@ debootstrap as root:
debootstrap sid mnt/
settrans -fga mnt
-### IRC, freenode, #hurd, 2013-09-15
- <gnu_srs> Never dared to try a subhurd, any link to the howto?
- <teythoon> gnu_srs: I followed
- though using crosshurd
- didn't work for me, I just used debootstrap
- <teythoon> gnu_srs: and you need a separate filesystem translator (i.e. not
- /) for that
- <teythoon> the easiest way is to add another virtual disk to you qemu setup
- <braunr> use the qemu image directly
- <braunr> simplest way to set up a subhurd
- <braunr> just change fstab from the host before the first boot to avoid
- making the subhurd use the same hd0 drive as the host
- <teythoon> braunr: nice idea :)
## Booting
If you are using a recent version of the Hurd (>= 0.9), then you can