diff options
| author | shakthimaan <shakthimaan@web> | 2008-09-23 05:45:09 +0000 |
|---|---|---|
| committer | GNU Hurd wiki engine <web-hurd@gnu.org> | 2008-09-23 05:45:09 +0000 |
| commit | 7ea8f272277a21c9a8f6761bc552ef9805bc7667 (patch) | |
| tree | e35e588a84aef0c89224e0eac90ad56166d661fe /microkernel/mach/gnumach/ports/xen.mdwn | |
| parent | 071534c77850ea1f32987c3b908c047c40c225b4 (diff) | |
.
Diffstat (limited to 'microkernel/mach/gnumach/ports/xen.mdwn')
| -rw-r--r-- | microkernel/mach/gnumach/ports/xen.mdwn | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/microkernel/mach/gnumach/ports/xen.mdwn b/microkernel/mach/gnumach/ports/xen.mdwn index 695be30d..5d33a8d0 100644 --- a/microkernel/mach/gnumach/ports/xen.mdwn +++ b/microkernel/mach/gnumach/ports/xen.mdwn @@ -16,7 +16,7 @@ On Debian Lenny, for example, you can install xen-hypervisor-3.2-1-i386-nonpae. If you have a free partition, you can fdisk to type 0x83, create a filesystem using: - sudo mke2fs -b 4096 -I 128 -o hurd /dev/sda4 + sudo mke2fs -b 4096 -I 128 -o hurd /dev/sda4 Replace /dev/sda4 with your partition. Install and use crosshurd to setup a GNU/Hurd system on this partition. @@ -31,12 +31,12 @@ You can either get binaries at <http://youpibouh.thefreecat.org/hurd-xen/> or bu Here is a sample /etc/xen/hurd configuration - kernel = "/boot/gnumach-xen" - memory = 256 - disk = ['phy:sda4,hda,w'] - extra = "root=device:hd0" - vif = [ '' ] - ramdisk = "/boot/hurd-modules" + kernel = "/boot/gnumach-xen" + memory = 256 + disk = ['phy:sda4,hda,w'] + extra = "root=device:hd0" + vif = [ '' ] + ramdisk = "/boot/hurd-modules" - Run `xm create -c hurd`, gnumach should get started. - If `xm` complains about networking (`vif could not be connected`), it's Xen scripts' fault, see Xen documentation for how to configure the network. The simplest way is network-bridge with fixed IPs (note that you need the bridge-utils package for this). You can also just disable networking by commenting the vif line in the config. |