summaryrefslogtreecommitdiff
path: root/hurd
diff options
context:
space:
mode:
authorSamuel Thibault <samuel.thibault@ens-lyon.org>2012-02-23 02:14:03 +0100
committerSamuel Thibault <samuel.thibault@ens-lyon.org>2012-02-23 02:14:03 +0100
commit42843605d20f7b85ba0b08bcd363ccdf3ceb8b6b (patch)
tree4c46a705f42fe36033c432a0cb3aabd0f1ec4cee /hurd
parentf08826f63374bb72c23d0f70e76963c0c4a7d2fd (diff)
skip steps when the latest package is installed
Diffstat (limited to 'hurd')
-rw-r--r--hurd/dde/guide.mdwn24
1 files changed, 12 insertions, 12 deletions
diff --git a/hurd/dde/guide.mdwn b/hurd/dde/guide.mdwn
index 0cea6655..bf41dd79 100644
--- a/hurd/dde/guide.mdwn
+++ b/hurd/dde/guide.mdwn
@@ -173,25 +173,25 @@ we can now build the necessary Hurd and DDE bits:
$ autoreconf -i && ./configure
- $ make libddekit libmachdev devnode pfinet # Hurd components. This is not needed if you have hurd >= 20120219-1 already installed and running.
+ $ make libddekit libmachdev devnode pfinet # Hurd components. This is not needed if you have the Debian hurd-dev >= 20120219-1 package already installed.
- $ cd libdde_linux26 # common DDE driver code -- uses a different Makefile system than the Hurd components!
+ $ make -C libdde_linux26 # common DDE driver code -- uses a different Makefile system than the Hurd components! This is not needed if you have the Debian hurd-dev >= 20120219-2 package already installed.
- $ make
+If you have the Debian hurd-dev >= 20120219-2 package already installed (and thus skipped the previous steps), run:
- $ cd ../dde_forcedeth # actual driver
+ $ make -C dde_forcedeth PKGDIR=/usr/share/libdde_linux26 # actual driver
- $ make
+otherwise, after doing the previous steps, use:
-Install the various built components to their final destinations (as root):
+ $ make -C dde_forcedeth # actual driver
+
+Install the various built components to their final destinations (as root). You only need to install dde_forcedeth if you are already running the Debian gnumach >= 2:1.3.99.dfsg.git20120219-1 and hurd-dev >= 20120219-1 packages:
$ cd ~me/dde/
$ cp gnumach/gnumach /boot/gnumach_dde
- $ mkdir /hurd/dde
-
- $ cp hurd/devnode/devnode hurd/pfinet/pfinet hurd/dde_forcedeth/dde_forcedeth /hurd/dde
+ $ cp hurd/devnode/devnode hurd/pfinet/pfinet hurd/dde_forcedeth/dde_forcedeth /hurd
Now everything should be ready.
@@ -204,19 +204,19 @@ in the boottime grub menu while testing.)
Once there, set up the translators for the driver (as root):
- $ settrans -cap /dev/forcedeth /hurd/dde/dde_forcedeth
+ $ settrans -cap /dev/forcedeth /hurd/dde_forcedeth
If that spews error "vm_allocate_contiguous: (ipc/mig) bad request message ID",
you are mixing things: either use the debian kernel and the dde-debian incubator
branch, or use your kernel built from the master-user_level_drivers branch and
the dde incubator branch, but don't make any mixture.
- $ settrans -cap /dev/eth0 /hurd/dde/devnode -M /dev/forcedeth eth0
+ $ settrans -cap /dev/eth0 /hurd/devnode -M /dev/forcedeth eth0
Finally, we can set up the actual network translator,
using something like:
- $ settrans -cap /servers/socket/2 /hurd/dde/pfinet -i /dev/eth0 -a 192.168.1.194 -g 192.168.1.254 -m 255.255.255.0
+ $ settrans -cap /servers/socket/2 /hurd/pfinet -i /dev/eth0 -a 192.168.1.194 -g 192.168.1.254 -m 255.255.255.0
For the exact syntax,
see the normal network setup documentation.